/img/logo.png /img/logo.png
18020268948 中文

Air compression chuck


0.1.jpg
Product Features:
● Oil pressure hidden machinery, free oil pressure rotation cylinder
● Cleak accuracy of 0.05 ~ 0.08mm (lying ends 10mm)
● Strict dustproof design, confirm the life of the protective shaft bearing
● The hydraulic specifications are strong, and they are easy to re -cut.
● Simple structure, high efficiency, low -cost design
● Aluminum alloy cylinder, light light, and heat dissipation effectively reduce temperature

Product Suitability:
● It is applicable to cutting, laser cutting and turning of internal and external diameters of tube and shaft products with general accuracy

Note:
● Insufficient waterproof capacity, please do not use cutting fluid with pressure for a long time
1.2.jpg

Product ModelProduct Parameters

ABCDEFGHI
JA5-251351002641054568170115
JA7-401921554651256595212172
JA7-70192155695140105136266172

Product ModelProduct Parameters

JWorking pressure
kg/cm2
Limiting speedClamping torqueAdapting gripperClamping strokeHollow apertureMaximum clamp
diameter
Weight(KG)
JA5-25M8*1.252~81800rpm15N.mC-251.5mm∮25∮327.6
JA7-40M10*1.52~81800rpm25N.mC-401.5mm∮40∮5015.3
JA7-70M10*1.53~81400rpm30N.mC-701.5mm∮68∮9025

Note: CLAMPING TORQUE is measured with 6kg/cm 2 holding a 20mm round rod to measure
■ The data of the above products is for reference only. It can be changed according to the needs of the workpiece. Various non -standard products can be taken according to the workpiece and processing needs.
■ The product continues to improve. If there is a change in this directory parameters, please consult our company. The final confirmation parameters are subject to!

Air pressure chuck, hydraulic chuck, hydraulic chuck


7.1.jpg
Product Features:
● Oil pressure hidden machinery, free oil pressure rotation cylinder
● Cleak accuracy of 0.05 ~ 0.1mm (lying ends 10mm)
● Strict dustproof design, confirm the life of the protective shaft bearing
● The hydraulic specifications are strong, and they are easy to re -cut.
● Simple structure, high efficiency, low -cost design. Aluminum alloy cylinder, light light, and heat dissipation effectively reduce temperature

Product Suitability:
● It is applicable to the cutting, laser cutting, internal and external diameter turning and end face processing of pipe shaft products with general accuracy
● If the bobbin is used due to excessive fatigue, the bobbin clip has a fracture probability and there is a danger of injury caused by shooting. It must be equipped with a protective cover when using

Note:
● The waterproof ability is insufficient. Do not use the cutting fluid with pressure for a long time
● Please strictly observe the pressure and speed limits to ensure the bearing life (as shown in the following chart)
2.2.jpg
Product ModelProduct Parameters

ABCDEFGHI
JH5-251351002641054568138115
JH7-401921554651286595192172
JH7-70192155695141.9105126212172
JH9-90230190896150105136232210
JH9-1202301901206160140168275210

Product ModelProduct Parameters

JWorking pressure
kg/cm2
Limiting speed
rpm/min
Clamping torqueClamping strokeHollow apertureMaximum clamp
diameter
Adapting gripperWeight(KG)
JH5-253-M810~25180030N.m1mm∮25∮32C-256.9
JH7-403-M1010~20160040N.m1mm∮40∮50C-4013.6
JH7-703-M1010~20140040N.m1mm∮68∮90C-7021
JH9-903-M1210~20110040N.m1mm∮89∮90C-7023
JH9-1203-M1210~1890050N.m1mm∮120∮132C-12032

Note: CLAMPING TORQUE is tested with 20kg/cm 2 holding a 20mm round stick;
■ The data of the above products is for reference only. It can be changed according to the needs of the workpiece. Various non -standard products can be taken according to the workpiece and processing needs.
■ The product continues to improve. If there is a change in this directory parameters, please consult our company. The final confirmation parameters are subject to!

JH (A) 7-44 Air oil chuck, air pressure chuck


7.2.jpg
Product Features:
● Hidden machinery in the oil pressure cylinder, free oil pressure to turn the cylinder
● Strong grip, you can repeat it. The body accuracy is within 0.01mm, and the accuracy of the clamping accuracy is about 0.03mm (end surface 20mm)
● Together with the body, strong rigidity and high accuracy. Strict dustproof design, indeed protect the life of the bearing
● Aluminum alloy cylinder, light quality, good heat dissipation, effective reduction temperature
● The use of power sources can be used for air or hydraulic pressure.

Product Application:
● It is applicable to the cutting, internal and external diameter turning and end face processing of pipe shaft products with general accuracy

Note:
● The waterproof capacity is insufficient, please do not use cutting fluid
● Please strictly observe the regulations on pressure and speed limits to ensure the bearing life (corresponding pressure and speed relationship table)
3.4.jpg

3.2.jpg
3.3.jpg
Product ModelProduct Parameters

WeightMaximum speedExtreme pressureAdapting colletClamping pressureHollow apertureClamping strokeClamping system
JH7-4417kg1600rpm10~20kgC-4410kg-m45mm1.5mmPush forward
JA7-4417kg1600rpm2-8kgC-446kg-m45mm1.5mmPush forward

■ The data of the above products is for reference only. It can be changed according to the needs of the workpiece. Various non -standard products can be taken according to the workpiece and processing needs.
■ The product continues to improve. If there is a change in this directory parameters, please consult our company. The final confirmation parameters are subject to!
Copyright © 2022 CHC precision machnery co., LTD All rights reserved Record No.: Su ICP No. 08111894 -1 Kunshan website construction