Air compression chuck
Product Features：
● Oil pressure hidden machinery, free oil pressure rotation cylinder
● Cleak accuracy of 0.05 ～ 0.08mm (lying ends 10mm)
● Strict dustproof design, confirm the life of the protective shaft bearing
● The hydraulic specifications are strong, and they are easy to re -cut.
● Simple structure, high efficiency, low -cost design
● Aluminum alloy cylinder, light light, and heat dissipation effectively reduce temperature
Product Suitability：
● It is applicable to cutting, laser cutting and turning of internal and external diameters of tube and shaft products with general accuracy
Note：
● Insufficient waterproof capacity, please do not use cutting fluid with pressure for a long time
| Product Model | Product Parameters |
| A | B | C | D | E | F | G | H | I |
| JA5-25 | 135 | 100 | 26 | 4 | 105 | 45 | 68 | 170 | 115 |
| JA7-40 | 192 | 155 | 46 | 5 | 125 | 65 | 95 | 212 | 172 |
| JA7-70 | 192 | 155 | 69 | 5 | 140 | 105 | 136 | 266 | 172 |
| Product Model | Product Parameters |
| J | Working pressure
kg/cm2 | Limiting speed | Clamping torque | Adapting gripper | Clamping stroke | Hollow aperture | Maximum clamp
diameter | Weight（KG） |
| JA5-25 | M8*1.25 | 2～8 | 1800rpm | 15N.m | C-25 | 1.5mm | ∮25 | ∮32 | 7.6 |
| JA7-40 | M10*1.5 | 2～8 | 1800rpm | 25N.m | C-40 | 1.5mm | ∮40 | ∮50 | 15.3 |
| JA7-70 | M10*1.5 | 3～8 | 1400rpm | 30N.m | C-70 | 1.5mm | ∮68 | ∮90 | 25 |
Note: CLAMPING TORQUE is measured with 6kg/cm 2 holding a 20mm round rod to measure
■ The data of the above products is for reference only. It can be changed according to the needs of the workpiece. Various non -standard products can be taken according to the workpiece and processing needs.
■ The product continues to improve. If there is a change in this directory parameters, please consult our company. The final confirmation parameters are subject to!
Air pressure chuck, hydraulic chuck, hydraulic chuck
Product Features：
● Oil pressure hidden machinery, free oil pressure rotation cylinder
● Cleak accuracy of 0.05 ～ 0.1mm (lying ends 10mm)
● Strict dustproof design, confirm the life of the protective shaft bearing
● The hydraulic specifications are strong, and they are easy to re -cut.
● Simple structure, high efficiency, low -cost design. Aluminum alloy cylinder, light light, and heat dissipation effectively reduce temperature
Product Suitability：
● It is applicable to the cutting, laser cutting, internal and external diameter turning and end face processing of pipe shaft products with general accuracy
● If the bobbin is used due to excessive fatigue, the bobbin clip has a fracture probability and there is a danger of injury caused by shooting. It must be equipped with a protective cover when using
Note：
● The waterproof ability is insufficient. Do not use the cutting fluid with pressure for a long time
● Please strictly observe the pressure and speed limits to ensure the bearing life (as shown in the following chart)
| Product Model | Product Parameters |
| A | B | C | D | E | F | G | H | I |
| JH5-25 | 135 | 100 | 26 | 4 | 105 | 45 | 68 | 138 | 115 |
| JH7-40 | 192 | 155 | 46 | 5 | 128 | 65 | 95 | 192 | 172 |
| JH7-70 | 192 | 155 | 69 | 5 | 141.9 | 105 | 126 | 212 | 172 |
| JH9-90 | 230 | 190 | 89 | 6 | 150 | 105 | 136 | 232 | 210 |
| JH9-120 | 230 | 190 | 120 | 6 | 160 | 140 | 168 | 275 | 210 |
| Product Model | Product Parameters |
| J | Working pressure
kg/cm2 | Limiting speed
rpm/min | Clamping torque | Clamping stroke | Hollow aperture | Maximum clamp
diameter | Adapting gripper | Weight（KG） |
| JH5-25 | 3-M8 | 10～25 | 1800 | 30N.m | 1mm | ∮25 | ∮32 | C-25 | 6.9 |
| JH7-40 | 3-M10 | 10～20 | 1600 | 40N.m | 1mm | ∮40 | ∮50 | C-40 | 13.6 |
| JH7-70 | 3-M10 | 10～20 | 1400 | 40N.m | 1mm | ∮68 | ∮90 | C-70 | 21 |
| JH9-90 | 3-M12 | 10～20 | 1100 | 40N.m | 1mm | ∮89 | ∮90 | C-70 | 23 |
| JH9-120 | 3-M12 | 10～18 | 900 | 50N.m | 1mm | ∮120 | ∮132 | C-120 | 32 |
Note: CLAMPING TORQUE is tested with 20kg/cm 2 holding a 20mm round stick;
■ The data of the above products is for reference only. It can be changed according to the needs of the workpiece. Various non -standard products can be taken according to the workpiece and processing needs.
■ The product continues to improve. If there is a change in this directory parameters, please consult our company. The final confirmation parameters are subject to!
JH (A) 7-44 Air oil chuck, air pressure chuck
Product Features：
● Hidden machinery in the oil pressure cylinder, free oil pressure to turn the cylinder
● Strong grip, you can repeat it. The body accuracy is within 0.01mm, and the accuracy of the clamping accuracy is about 0.03mm (end surface 20mm)
● Together with the body, strong rigidity and high accuracy. Strict dustproof design, indeed protect the life of the bearing
● Aluminum alloy cylinder, light quality, good heat dissipation, effective reduction temperature
● The use of power sources can be used for air or hydraulic pressure.
Product Application：
● It is applicable to the cutting, internal and external diameter turning and end face processing of pipe shaft products with general accuracy
Note：
● The waterproof capacity is insufficient, please do not use cutting fluid
● Please strictly observe the regulations on pressure and speed limits to ensure the bearing life (corresponding pressure and speed relationship table)
| Product Model | Product Parameters |
| Weight | Maximum speed | Extreme pressure | Adapting collet | Clamping pressure | Hollow aperture | Clamping stroke | Clamping system |
| JH7-44 | 17kg | 1600rpm | 10～20kg | C-44 | 10kg-m | 45mm | 1.5mm | Push forward |
| JA7-44 | 17kg | 1600rpm | 2-8kg | C-44 | 6kg-m | 45mm | 1.5mm | Push forward |
■ The data of the above products is for reference only. It can be changed according to the needs of the workpiece. Various non -standard products can be taken according to the workpiece and processing needs.
■ The product continues to improve. If there is a change in this directory parameters, please consult our company. The final confirmation parameters are subject to!
中文
